User guide

13-19
SDF Backannotation
Syntax:
INTERCONNECT_MIPD = MINIMUM | MAXIMUM | AVERAGE | LAST;
Example:
INTERCONNECT_MIPD=LAST;
map_command:
This command maps the SDF constructs to VCS Simulation Delay
Objects.
Note:
Refer to Table 13-1: VCS Simulation Delay Objects/Constructs.
Syntax:
sdf_construct = veritool_map ;
sdf_construct : IOPATH | PORT | INTERCONNECT | NETDELAY |
DEVICE | SETUP | HOLD | SETUPHOLD | RECOVERY | SKEW | WIDTH
| PERIOD | NOCHANGE | PATHPULSE | GLOBALPATHPULSE
veritool_map : IGNORE | INTERMOD_PATH | MIPD | CELL | USE
Example:
INTERCONNECT=MIPD;
PATHPULSE=IGNORE;
mtm_command:
Annotates the minimum, typical, or maximum delay value. Specifies
one of the following keywords:
MINIMUM
Annotates the minimum delay value