User guide

3-9
Hierarchy Browse
r
Adding Signals to a Group
The Add button adds selected signals to an existing signal group. The
Signal Group is selected via the Signal Group menu (see
Figure 3-4,
Signal Group Menu). Signal groups are used to display related signals
in the Waveform Window. When you click left on the Signal Group
button, the menu of existing signal groups opens. If there are no
available groups, the Group button displays AutoGroup0 (a
predefined signal group).
Figure 3-4 Signal Group Menu
To add signals to a group:
1. Select one or more signals in the Signal Select Pane.
2. Click left on the Signal Group button to open the menu and select
the group to which you want to add the signals.
3. Click left on Add. The signals are added to the group.
Selected Signals
Group
Add button
Menu