User guide

7-2
Register Window
The Register Window consists of one main display area, a Time field,
and a status bar. These are described below.
What is a View?
A view is a free graphics display that is often used as a scratch pad.
It can be saved to the configuration file and reused by loading the
configuration file. A name is assigned to the view with View Editor
(opened from the Edit menu). To display a menu of available views,
click left on the binoculars icon in the toolbar. Automatically named
views are called AutoViewN, where N is a sequentially assigned
number starting with 0 for the first group.
Display Area
The design view is created and displayed by
placing signals and objects in the display area. You
can load the desired design view from a previous
configuration or construct it within the display area.
The Register Window provides basic drawing tools
to construct and enhance the view.
Time Field
(Time Control Text Field)
Use the time field to jump to a specific time. To
display values for a new simulation time, enter the
time and press Enter or click left on the OK button.
All windows linked to the Register Window also
display the new simulation time. The time entered
must also be within the time range of the simulation
file.
Status Bar
The Status Bar, located at the bottom of the
window, displays descriptions of window areas,
hierarchical signal names, descriptions of unique
event indicators, and control buttons within the
window.