User guide

6-30
Logic Browser
Edit Menu
Display Menu
Clear Displayed Routes - Clear the
displayed routes. To view routes previous to
the last change, drag the signal back into the
Logic Browser from another window.
Clear All Routes - Clear all routes, even
those not currently displayed. Dragging a
signal in again displays the signal with no
previous routing.
Markers - Open the Markers Dialog. The
dialog is used to define markers for specific
simulation times.
Show Multiple Nets - Displays a multi-net
schematic,
Show Single Net - Displays a single net at
a time, which corresponds to the Focus Net
mode in previous VirSim Releases.
Net Only - Displays only the net name at the
port instance.
Port and Net - Displays the net and port
name at the port instance.
Time Scale - Open the Time Scale Dialog
for setting the display unit and display
precision for VirSim display time.
Unique Events -Toggle Unique Events on
or off. When on, unique events are displayed
with signal values in the Logic Browser. When
off, unique events do not display.
Autoload Values - Automatically loads
signal values as new signals are added to the
display.