User manual

Mar/07 MN

boxes, click Next, then click Next again.

5. If the Digital Signature Not Found message appears, click Yes .

Our driver has been thoroughly tested for stability and

compatibility.

6. Click Next, then Finish.

7. Repeat steps 2-6.

8. Click Ye s to restart to complete the installation.

For Windows® Vista

™

For New Installation

A new installation requires a floppy disk for the driver

installation. To make this floppy disk, copy the contents of

the “

Driver\x86” folder, found on the driver CD, onto a blank floppy

disk then follow the directions below.

1. Setup the RAID Array prior to Windows installation.

2. Follow Microsoft’s Windows installation procedure.

3. Restart the computer when prompted by Windows’ installation.

4. At the Windows Setup screen, press Load Driver to install the

RAID driver.

5. Insert the floppy disk, please select Silicon Image SiI 3132

SoftRaid 5 Controller (A:\si3132r5.inf), then press Next.