User manual

- Advanced
On this tab you can set the advanced wireless settings. If you’re in doubt what to
enter or use here, leave these settings as it is. This is for advance users only. Wrong
parameters can make the router un-operational.
Fragment Threshold: Default value is 2346.Specifies the maximum size of a
packet during the fragmentation of data to be transmitted. If you set this value
too low, it will result in a bad performance.
RTS Threshold: Default value is 2347. When the packet size is smaller than
the RTS threshold, the wireless router will not use the RTS/CTS mechanism to
send this packet.
Beacon Interval: Default value is 100. This is the interval of time that this
wireless router broadcasts a beacon. A Beacon is used to synchronize the
wireless network.
45