Product specifications

www.encore-usa.com
54
If there is an empty credential, the driver will select any non-security AP.
PIN: Start to add to Registrar using PIN configuration method. IF STA Registrar, remember
that enter PIN Code read from you Enrollee before starting PIN.
PBC: Start to add to AP using PBC configuration method.
When you click PIN or PBC, please don’t do any rescan within two-minute
connection. If you want to abort this setup within the interval, restart PIN/PBC or
press Disconnect to stop WPS connection.
WPS associate IE: Send the association request with WPS IE during WPS setup. It is
optional for STA.
WPS probe IE: Send the probe request with WPS IE during WPS setup. IT is optional for
STA.
Progress Bar: Display rate of progress from Start to Connected status.
Status Bar: Display currently WPS Status.
[WPS Information on AP]
WPS information contain authentication type, encryption type, config methods, device
password ID, selected registrar, state, version, AP setup locked, UUID-E and RF bands.
Authentication Type: There are three types of authentication modes supported by
EncoreConfig. There are Open, Shared, WPA-PSK, and WPA system.