Product specifications

53
www.encore-usa.com
configuration method or PBC configuration setup using PIN configuration method or PBC
configuration method through an internal or external Registrar.
WPS AP List: Display the information of surrounding APs with WPS IE from last scan
result. List information includes SSID, BSSID, Channel, ID (Device Password ID),
Security-Enabled.
Rescan: Issue a rescan command to wireless NIC to update information on surrounding
wireless network.
Information: Display the information about WPS IE on the selected network. List
Information includes Authentication Type, Encryption Type, Config Methods, Device
Password ID, Selected Registrar, State, Version, AP Setup Locked, UUID-E and RF
Bands.
PIN Code: 8-digit numbers. It is required to enter PIN Code into Registrar using PIN
method. Each NIC Wireless has only one PIN Code of Enrollee.
Config Mode: Our station role-playing as an Enrollee or an external Registrar.
WPS Profile List: Display all of credentials got from the Registrar. List information
includes SSID, MAC address, Authentication and Encryption Type. If STA Enrollee,
credentials are created as soon as each WPS success. If STA Registrar, EncoreUI creates
a new credential with WPA2-PSK/AES/64Hex-Key and doesn’t change until next switching
to STA Registrar.
Control items on WPS Profile List:
Î Detail: Information about Security and Key in the credential
Î Connect: Command to connect to the selected network inside credentials.
The active selected credential is as like as the active selected Profile.
Î Rotate: Command to rotate to connect to the next inside credentials
Î Disconnect: Stop WPS action and disconnect this active link. And then select
the last profile at the Profile Page of EncoreUI if exist. If there is an empty profile
page, the driver will select any non-security AP.
Î Delete: Delete an existing credential. And then select the next credential if exist.