Product specifications

www.encore-usa.com
40
Rescan: Click this button to rescan access points. You can click this button for several
times, if the access point you wish to use does not show in the list.
Add to Profile: You can store a specific access point to profile, so you can link to that
access point directly next time without inputting authentication key again.
Connect: Connect to a selected access point. You have to select an access point from the
list first and then click “Connect” to connect to the selected access point.
[Icons & Buttons]
Î Indicate connection is successful.
Î Indicate network type is infrastructure mode.
Î Indicate network type is Ad-Hoc mode.
Î Indicate security-enabled wireless network.
Î Indicate 802.11a wireless mode
Î Indicate 802.11b wireless mode.
Î Indicate 802.11g wireless mode.
Î Indicate 802.11n wireless mode.
Î Indicate the AP lists are sorted by SSID, Channel, or Signal.
Î Issue a rescan command to wireless NIC to update information on
surrounding wireless network.
Î Add the selected AP to Profile setting. It will bring up profile page and save
user’s setting to a new profile.
Î Command to connect to the selected network.
[Connected Network]
(1) When EncoreUI first ran, it will select the best AP to connect automatically.
(2) If user wants to connect to other AP, He can click “Connect: button for the intended AP
to make connection.
(3) If the intended network has encryption other than “Not Use”, EncoreUI will bring up
the security page appropriate information to make the connection.
(4) When you double-click on the intended AP, you can see AP’s detail information.