Product specifications

www.encore-usa.com

C. WPA / WPA2 / WPA2-Auto with EAP

Select EAP (Extensible Authentication Protocol) if a Radius server is connected in the

wireless network.

Encryption Type — Select TKIP, AES, or Auto encryption.

Note: TKIP is available for B or G WLAN band only. The WLAN Band setting is under

Wireless > Advanced menu.

Radius Server 1 — Enter the following information:

 IP Address: The IP address of the authentication server.

 Port: The port number used to connect to the authentication server.

 Shared Secret: The secret passphrase to connect to the authentication server.

WDS Security — Select Enable to prompt users to enter a security key before allowing

access to the wireless network.

WDS Auth Type — Select the type of security to use: WEP or WPA2.

D. WEP

With WEP (Wired Equivalent Privacy), wireless clients must enter the same key to connect

to the wireless network.

WEP Key Format — Select a security key format:

 HEX: To enter a security key using the characters 0~9, A~F, a~f.

 ASCII: To enter a security key in alphanumeric format.

WEP Key Length — Select an encryption length:

 64-bit: To enter a 10-character security key.

 128-bit: To enter a 26-character security key.

WEP Key — Enter desired security key.

E. WPA2

WPA2 provides a more secured encryption.

Passphrase and Confirmed Passphrase — Enter a passphrase with at least 8

characters.