Product specifications

13
www.encore-usa.com
3.3 Basic Settings
After you log in to the web-based configuration utility, the System > Device Information
screen is displayed.
On the menu panel, click Wireless > Basic to open the Basic screen and select the
Extender operation mode.
The required parameters on this screen vary depending on the selected operation mode.
Operation Mode — Select an operation mode:
 AP (Access Point): The Extender works as an access point for clients in the
wireless network. See ”AP Mode” on page 14.
 Rep
eater:
The Extender repeats the signal from a wireless router for clients
outside the router range. See “Repeater Mode” on page 16.
 WDS
(Wireless Distribution Sy
stem): The Extender connects two or more
access points. See “WDS Mode” on page 18.
 AP +
W
DS: The Extender acts as the access point to two or more access
points that are connected in a WDS. See “AP + WDS Mode” on page 20.