User`s guide

Profile

This profile page allows users to save different wireless settings, which helps users to get access

to wireless networks at home, office or other wireless network environments quickly.

To add a new profile:

1. Click the Add button. The add profile window pops up.

Note: you could also add a new profile quickly by selecting an available network in the

Network function then click the Add to Profile button.

2. Fill in information for this profile in the system config section:

Items Information

Profile Name Choose a name for this profile, or use default name defined by system.

SSID Fill in the intended SSID name or use the drop list to select from

available Aps.

Power Save Mode Choose from CAM (Constantly Awake Mode) or PSM (Power Saving

Mode).

Network Type There are two types, infrastructure and 802.11 Ad-hoc modes. Under

Ad-hoc mode, you could also choose the preamble type; the available

preamble type includes auto and long. In addition to that, the channel

field will be available for setup in Ad-hoc mode.

RTS Threshold For adjusting the RTS threshold number by sliding the bar or key in the

value directly. The default value is 2347.

Fragment

Threshold

Adjust the Fragment threshold number by sliding the bar or key in the

value directly. The default value is 2346.