User`s guide

3
HARDWARE INSTALLATION
LED Indicator
Power (PWR)
The PWR indicator lights green while the Wireless Cardbus adapter is connecting
to the Cardbus or PCMCIA slot, otherwise, it is off.
ACT (Activity)
The ACT indicator blinks green when the Wireless Cardbus Adapter is connected
to a network successfully and transmitting data. Otherwise the indicator is off
whiles the Wireless LAN is stand by.
Check the installation
The LEDs of the Wireless Cardbus Adapter are clearly visible and the status of the
network link can be seen instantly:
1. Once the device is plugged to the station’s Cardbus slot, the PWR LED of the
Wireless Cardbus Adapter will light up indicating a normal status.
2. When the device plugged to the station’s Cardbus slot and the driver was
installed, the ACT and PWR LED will start alternate blinking, it means that the
device is starting to scan the wireless devices near the Wireless Cardbus Adapter.
3. While the Wireless Cardbus Adapter linked up and transmitting data to the
Access Point or to other Wireless LAN station, the ACT LED will start blinking.