ENXTV-X3 External TV Tuner HD User Manual
ENXTV-3 - User Manual Important Notice: This manual is provided “as is” without warranty of any kind, either express or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
ENXTV-3 - User Manual Contents: Chapter1: Introduction ....................................................................................................... 3 1.1 Features................................................................................................................ 3 1.2 System Requirements........................................................................................... 4 1.3 Specifications........................................................................................
ENXTV-3 - User Manual Chapter1: Introduction The ENXTV-X3 is an excellent solution in combining a computer and a TV system without the need for a screw driver or software driver. Enhance your computer to a home theater quality system adding an HDTV resolution receiver, just plug in cables and power adapter, and you will experience high resolution TV programs. The ENXTV-X3 provides high quality, high resolution of up to1920x1200.
ENXTV-3 - User Manual 1.2 System Requirements LCD, CRT or other types of monitors/projectors with PC VGA (D-sub) input. A computer is necessary when in PIP mode. No specific PC system required. Video source (broadcast TV, cable TV, PC, DVD Player, camcorder, game console, etc.) 1.
ENXTV-3 - User Manual 1.4 Package Contents ENXTV-X3 External TV Tuner HD Remote control Power adaptor VGA-In Loop Back cable (for PIP mode) 3.
ENXTV-3 - User Manual Chapter 2: Getting Started ENXTV-X3 cable connection is easy. The most typical cable connections are shown in the picture diagram below. Do not connect the power cable before you connect these cables. If the speaker cable is connected to the computer’s sound card, the audio will not work. The audio speaker cable should be connected to the ENXTV-X3 Audio-Out port when you are watching the TV without turned on the computer.
ENXTV-3 - User Manual 2.1 Rear panel connectors CONNECTOR TYPE DESCRIPTION DC In 5mm, INT+, EXT- AC adapter, power in (5V, 1 A) RF TV antenna connector TV or CATV signal-in connector Audio In 3.5mm stereo Audio In connects to PC sound system (Speaker out of connector sound card). 3.5mm stereo Audio out connects to the speaker. Audio Out connector VGA In VGA Out S-Video In 8 pin Mini DIN VGA-In loop back cable.
ENXTV-3 - User Manual Chapter 3: Using the ENXTV-X3 3.1 PC side VGA resolution setting ENXTV-X3 can be used independent of PC system for a full screen display. In addition to the full screen display, when it is connected in conjunction with the computer system, the PIP sub video window can also be displayed at the top of PC monitor screen to let the user watch TV while using the computer at the same time, or just enjoy full screen TV viewing.
ENXTV-3 - User Manual Chapter 4: Using the Remote Control The included infrared remote control allows you to operate ENXTV-X3 remotely, such as turning your TV on/off, changing channels, adjusting volume, etc. Aim the front of the remote control at the remote control receiver and press the control buttons as you would on the infrared receiver. 4.1 Installing Batteries Open the back cover of remote controller and put in two pieces of AAA batteries (alkaline battery recommended). 4.
ENXTV-3 - User Manual 4.3 How to use the OSD Display Menu In this section the ENXTV-X3 Main Menu and its operations will be discussed here. TV mode must be in Full Screen Mode. Press the MENU button from the remote control to get to this screen. Use the CH+/CH- keys to move the cursor to the desired item (Left and Right). Use the VOL+/VOL- keys to move the highlights down to every sub menus and use CH+/CH- keys to select.
ENXTV-3 - User Manual 4.
ENXTV-3 - User Manual RESOLUTION: 800x600, 1024x768, 1200x1024, 1400x1050, 1440x900, 1680x1050, 1920x1080 and 1920x1200 INPUT SOURCE: TV, VIDEO, SVIDEO and YPBPR OSD SETTING: LANGUAGE: OSD menu language selection: Chinese and English OSD POSITION: Adjust OSD Horizontal / vertical position TRANSPARENCY: Adjust OSD background transparency COLOR SYSTEM: Selection the TV standard VERSION: Show the firmware version 12
ENXTV-3 - User Manual Chapter 5: Tech Support Center Please visit our website for the latest updates and support information at www.encore-usa.com. International Support Hotlines Argentina (Buenos Aires) (Córdoba) +54 +54 11-6632-2120 35-1568-1873 soporte.argentina@encore-usa.com Chile +56 2-581-4903 soporte.chile@encore-usa.com Colombia +57 2-891-2696 soporte.colombia@encore-usa.com Mexico +52 55-2789-5414 soporte.mexico@encore-usa.com Peru +51 1-708-5421 soporte.peru@encore-usa.
