Product specifications

31
www.encore-usa.com
[ Option 2: Entering the Adapter’s PIN Code to the Router or Access Point ]
Note: T
o enter your adapter’s PIN code to your router or access point, you need to know
your router or access point’s IP address
. In addition, you need to have one of the following:
 A computer directly connects to the router or access point through wired
connection. This computer can be the one with ENUWI-2XN4 installed on or a
different one.
 A computer already connects to the router or access point through wireless
connection. For example, this could be your laptop computer.
A.
1. Go to the “W
i-Fi Protected Setup”
tab.
2. Click on “Pin In
put Config (PIN)”
3. Within two minutes
, enter the
wireless adapter’s PIN code into
your router or access point’s
Web-based Utility through a web
browser.
Note: T
o complete Step 3, you need to
know your router or access point’s IP
address to access its Web-based Utility.
B.
 Once connected, the tab will
automatically switch to the “General”
tab. The ‘Signal Strength’ and ‘Link
Quality’ bars will become active and
green.
Note: T
he ‘Encore Wireless Manager
Tray Icon’ at the lower right corner of the
screen will become green as well.