Product specifications

www.encore-usa.com
28
B4.1. WPS — PBC (Push Button Configuration)
Push Button Configuration (PBC) allows your c
omputer to connect to a wireless network
by the click of a button. You do not need to memorize your router or access point’s wireless
security password. Please check the user manual of your router or access
point to see if it supports WPS - PBC. Normally, the PBC button comes with
an icon like the one on the right.
Note: Before y
ou start, please have your wireless router and your computer in close range.
This is just temporary. You can place your router or computer anywhere you want
afterward.
A.
1. Go to the “W
i-Fi Protected Setup” tab.
2. Click on “P
ush Button Config (PBC).”
3. Within two minutes, press the
WPS-PBC button on your router or
access point.
Note: P
lease follow the instructions in the
user manual of your router or access point.
B.
 Once connected, the tab will
automatically switch to the “General”
tab. The ‘Signal Strength’ and ‘Link
Quality’ bars will become active and
green.
Note: T
he ‘Encore Wireless Manager
Tray Icon’ at the lower right corner of the
screen will become green as well.