User`s guide

5
ENUT
V
-
2
Use
r
’
s
Guide
-
Chapter 2: Getting St arted
2.1 Connect USB ENUTV-2
To install the ENUTV-2 into your computer, follow the steps below:
1. Connect the antenna cable to the “TV”
connector.
2. Connect the Device to PC USB Hub.
2.2 Device Driver Installation
1. Once you connect ENUTV-2 to the USB
port, you can just follow the system’s
prompted messages to finish the driver
installation.
2. When you insert ENUTV-2, system will
show the “Found New Hardware”
dialogue box.
3. Insert “Driver & Utilities” CD into
CD-ROM(or DVD-ROM), and click
“Setup Driver” button to setup the driver.