ENUET-3USB USB 3-port Hub with Ethernet Adapter User’s Manual ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
ABOUT THIS MANUAL This manual is designed for use with the ENUET-3USB USB 3-Port Hub with Ethernet Adapter. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Encore Electronics Inc.
Table of Contents 1. Introduction ............................................................................................................1 Features ............................................................................................................................. 1 Package Contents .............................................................................................................. 2 System Requirements..................................................................................
1. Introduction The Encore’s ENUET-3USB is a two-in-one product. It is a combination of a 3-port USB Hub and an Ethernet Adapter. As a fully integrated USB solution, the ENUET-USB allows users to connect to the Ethernet network while adding 3 more extra USB ports. Each USB port can be rotated up to 180º giving more space to larger USB devices.
Package Contents ENUET-3USB USB 3-port Hub with Ethernet Adapter Setup Disc CD (Manual & Driver) Quick Installation Guide 1 pc 1 pc 1 pc System Requirements Computer, Netbook or Laptop running Windows® 2000/XP/2003/ Windows Vista® Windows® 7, Mac OSX V10.3 10.4 10.5 and 10.6 One available USB port CDROM Drive ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
2. Installation Hardware Connection General instructions for installing the ENUET-3USB USB 3-port Hub with Ethernet Adapter is provided below. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
Software Driver Installation For MS Windows Users NOTE: DO NOT connect the ENUET-3USB to your computer at this time. You will be instructed to do so later. 1. Insert the provided setup CD into your disc drive. An Encore Welcome screen will pop up briefly followed by the Main Menu as seen in the images below: The USB Hub is a Plug-N-Play, no driver needed. The ”Windows Driver” icon in the main menu is for the 10/100 Ethernet Adapter only. Click on the “Windows Driver” icon to start the driver installation.
Main Menu Screen 2. The ENUET-3USB InstallShield Wizard will guide you thru the rest of the hardware installation. Click Next to proceed. 3. Click Install to begin. The installation process may take a few minutes. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
4. Click Finish to finish the driver installation. You will be prompted to re-start your computer after. If you prefer not to re-start your computer the Ethernet LAN port will not work until the PC is restarted. It is highly recommended you restart your computer at this stage. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
5. After your computer is restarted, connect the ENUET-USB USB cable to any available USB port on your computer. A pop-up message will appear in the notification area indicating the installation is completed. * Actual strings depend on your operation system. These screen shots are from Windows XP and may be different from your computer. Now, that the installation is completed.
For Mac OS X 10.3 / 10.4 1. Insert the provided driver CD into your CD-ROM drive. Double-click the CD and navigate to the directory of \Driver\Mac\Mac_OS X 10.x\AX88772.pkg 2. When the Install AX88772 USB CDC Drivers screen appears, please select Continue. 3. When the screen below appears, please choose the volume that you want to install and click Continue. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
4. When the screen below appears, please click Upgrade to perform the software. 5. Please enter your password as prompted. 6. Please select Continue Installation to install the software when the screen below prompted. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
7. Please click Restart to reboot the Mac. 8. Connect the Ethernet adapter to a free USB port. 9. Start System Preferences and select Network, you’ll see the screen as below prompted and please select OK. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
10.You will find that a new Ethernet network interface is available. It’s usually named Ethernet Adapter (en1) or Ethernet Adapter (en2). *Actual strings depend on your operation system. These screen shots are from MAC OS X 10.4 and might vary slightly for each operation system. Now the installation is complete. You may now connect the adapter to a network device by an Ethernet cable: 1. Connect an Ethernet cable to the Ethernet port on the adapter. 2.
3. A new Ethernet network interface will be showed up. By default, this will show up as Ethernet Adaptor (en1) or Ethernet Adaptor (en2), etc. *Actual strings depends on your operation system version, it may vary slightly depending on the operating system. Now that the installation of ENUET-3USB Ethernet adapter is complete. You may now connect the adapter to a network device using an RJ-45 CAT-5 of better Ethernet cable: 1. Connect an RJ-45 Ethernet cable to the Ethernet port on the adapter. 2.
Verifying Driver Installation On Windows® 2000/2003/XP/Windows Vista® / Windows® 7 Once you have finished the installation, you can open the Windows Device Manager to verify if your Ethernet adapter is recognized and properly installed. To access the Windows Device Manager: On Windows Vista: Right-click Computer on the desktop and click Properties > Device Manager. On Windows 2000/2003/XP: Right-click My Computer on the desktop and click Properties > (Hardware) > Device Manager.
On MAC OS X 10.3/10.4/10.5/10.6 Once you have finished the installation, you can open GO > Utilities > System Profile > Hardward > USB > to verify if your Ethernet adapter is properly installed. In the USB High-Speed Bus group, an item named ASIXx72A should be displayed. ENUET-3USB User’s Manual Encore Electronics Inc. Tel – (626) 336-4567 Fax – (626) 336-2345 Web Site – www.encore-usa.
3. Specifications Upstream port x 1 (USB Type A plug) USB Downstream port x 3 (USB Type A receptacles) Compliance : USB1.1 & USB 2.0 RJ-45 x 1 (Ethernet 10BASE-T/Fast Ethernet 100Base-TX port) LAN Power Input Complies with the Full-duplex with flow control and Half-duplex with backpressure operation 5 VDC / 2.
4. Regulatory Compliance FCC Conditions This equipment has been tested and found to comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference (2) This device must accept any interference received. Including interference that may cause undesired operation. Important! Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
