Service manual

92 Encore — Installation and Service Manual
Section 3 — Maintenance and Troubleshooting
2. Save the Salvo with the new name containing valid DOS FS2 characters
and delete the old Salvo.
Filename More than 8 Characters
Scenario
The Salvo file name has no restriction on the number of characters. If the
Salvo keycap name is more than 8 characters, the Panel Server will resize it
to 8 characters and list. However the Salvo cannot be used for any of the
operation.
Symptoms
The console connected to SCB, displays the following error message
Keycap name of Salvo <filename>exceeds 8 chars,
Rename the Salvo Keycap.
Unknown salvo name - <keycapname>
Recovery
1. Rename the keycap name such that it does not exceed 8 characters and
save using LRP.
Mapping Encore SCB Drives
System Controller (SCB) flash drives can be mapped using a Window PC
residing on the Encore network. This permits viewing the files located on
the flash, and allows file copying and deleting.
CAUTION Do not change files residing on an Encore SCB flash unless you know exactly
what you are doing. Altering the wrong files can make the SCB inoperable.
To map SCB drives using Windows XP:
1. Open Windows Explorer.
2. Go to Tools / Map Network Drive.
3. Select a drive letter.
4. Enter the following into the Folder field, where xx.xx.xx.xx represents
the IP address of the SCB:
\\xx.xx.xx.xx\h0