Service manual

Encore — Installation and Service Manual 79
System Controller Web Pages
System Parameters
Permits entry of Asset Tag and Location information, for facility management
purposes. These appear on the System Controller Description screen.
System Controller Network Web Page
The System Controller Network web page can be used to change IP address
data used by the System Controller.
CAUTION Do not change IP address data unless you know exactly what you are doing.
Incompatible IP addresses will make the Encore system inoperable.
Figure 46. System Controller Network Web Page
When the Check to reboot now box is checked, clicking the Save New Settings
button reset the System Controller and enact any changes made to the set
-
tings above.
The Cancel New Settings box clears all the fields above. Exiting the screen and
returning will bring back the original values.