Service manual

78 Encore — Installation and Service Manual
Section 3 — Maintenance and Troubleshooting
Application Configuration Web Page
The Application Configuration web page (Figure 45) is used to specify with
Encore applications will be able to be run on that System Controller, enable
options, and enter Asset Tag and Location information. The System Con
-
troller can also be rebooted from this screen.
Figure 45. Application Configuration Web Page
System Controller Configuration
Check boxes indicate which applications will run on that System Con-
troller. Changes are enacted with the Update configuration button.
The Reset configuration button clears all the checkboxes.
The Reboot box, if checked, will reboot the System Controller when the
Update configuration button is clicked.
Application Options
The currently enabled options are reported. Clicking on the Enter License Key
button opens a window allowing you to enter a license to change the
enabled options.