Service manual

72 Encore — Installation and Service Manual
Section 3 — Maintenance and Troubleshooting
System Controller Modules
To Remove System Controller Modules
1. Position the hands with the index and third fingers of both hands
curled around the module handle. Place both thumbs on the frame. See
Figure 39.
Figure 39. Removing the Controller Module
2. Push against the frame with the thumbs while gently pulling with the
fingers to disengage the module from the backplane.
3. Slide the module out of the frame.
4. Use anti-static precautions to protect the module.
8103_00_56r0
Handle
Frame
Frame
Handle
Controller
module
Controller
module
Remove Controller Module
Second Controller
module (shown unseated)
Leverage against frame
to unseat module