Service manual

Encore — Installation and Service Manual 115

Jupiter Control of Encore NP Protocol Serial Interface

Encore System Settings

When Jupiter controls an Encore system, on the Encore side only a serial

connection between the two systems needs to be established.

Jupiter System Settings

Once a serial connection exists, the extent of control that the Jupiter system

will have over the Encore system is determined by configuration on the

Jupiter side.

Serial Protocol:

GNP Grass Valley Native Protocol, 9600 Baud

Switcher Description, Input and Output Tables

Define Encore routers the same as Jupiter routers:

• Physical level must match router physical level

(x-1 because Jupiter is 0 based, while Encore is 1 based)

• Driver: GNP (Grass Valley Native Protocol)

• Switcher inputs and outputs are indexes in Encore router definitions)

Table 30. Jupiter Control Encore, NP Protocol over Serial Port, Encore Settings

RCL Client Serial

Protocol NP

Port 2

Data Bits 8

Stop Bits 1

Baud Rate 9600

Parity Odd

Hand Shake None

Refresh Rate 0