User`s manual

ENRTR-514 User’s Manual
- 6 -
100Mbps 100Mbps
Off WAN port is successfully connected to
10Mbps
On (Steady Green) System is hung. STATUS
Flashing ENRTR-514 is up and ready.
On (Steady Green) LAN port is successfully connected. LAN
(1, 2, 3, 4)
Flashing Data is being sent or received.
On (Steady Green) When push the reset button on rear panel Reset
Off When release the reset button on rear panel
Back Panel Connectors
Button/port Description
Button/port Description
Reset Reset configurations to default. Press the button and hold for 10
seconds.
1x, 2x, 3x, 4x LAN Ports. Connect LAN systems with RJ-45 cable.
WAN WAN port. Connect DSL or Cable modem.
PWR Power jack. Connect with AC power adapter.
1.4 System Requirements
● Broadband connection and Cable/DSL modem
● Computers with wired network adapters
● CD-ROM Drive
● Operation System: Windows® 7/XP/2000, Windows Vista®, Mac® OS, UNIX®, Linux®
● Web Browser: Internet Explorer® 5.0, Firefox® 2.0 or Safari® 1.4 or higher