Specifications

TCP/IP Status

1.Click Status, it then appears the sub-menu.

2.Click TCPIP, it then as shown in the following picture.

Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a

DHCP/BOOTP server on your network, this option allows the print server

to obtain IP-related settings automatically from your DHCP server.

IP Address: This option allows you to view IP address from the print server. The IP address

must meet the IP addressing requirements of the network segment. (default:

192.168.0.10)

Subnet Mask: This option allows you to view subnet mask from the print server.

Gateway’s IP: This option allows you to view gateway from the print server.