User`s guide
Status
The Status page shows the following information of the device. To open the Status
page, click the Status on the configuration categories list.
Items Information
Host name The identification of this device.
IP-address The IP address of the device
HD used (%) The usage percentage of HD (Total amount of HD)
Up-time The estimate time that you power the device on
Version The firmware version of the device.
Samba Users The number of members who is currently using the device by
Samba
FTP Users The number of members who is currently using the device by
FTP client
UPNP & Printer
Loaded
Check if the file for triggering UPNP and Printer server is
loaded.
Unicode Loaded Check if the file for enabling Unicode is loaded to the device.
Swap Enabled Check if the connected IDE interface HD is formatted with a
partition for Swap function.
Note: This page shows the device information only. To do more configurations about
each item, please refer to their instruction respectively in the following chapters.
35