User`s guide

Management items list
The following table lists the information and items that you can configure with the
GUI. For detail instruction, please refer to the following chapter.
Category Sub-category Information
Status Status Shows the status information of this device
including Host name, IP address, HD used
percentage, system up-time, firmware version,
Swap status, current Samba users and FTP
users.
Disk
Folder
T
o add a new folder, delete a folder, change
folder-access authentication and set up folder
properties.
Disk To format the connected IDE interface hard disk
in EXT3 Format and enable/disable Swap.
Network Host To change the device’s host name, Work group
name and description.
IP address
T
o configure the network settings for the device
including IP address, Subnet Mask, Gateway,
DNS server, DHCP enable/ disable and Jumbo
mode selecting.
System Administrator To change the Superuser name and password.
Time
T
o set up the system time zone, synchronize time
and assign a timeserver for the device.
User
T
o add a new user, delete a user, setup user
authorities and change user properties.
Group To make users in groups. Add users to groups or
delete users from groups.
Option FTP Change FTP properties including Maximum unit
number, Port number, Timeout setting and
enable/disable anonymous access.
Security IP
T
o configure the allowed or denied IP addresses
for getting access to the device.
Security MAC
T
o configure the allowed or denied MAC
addresses for getting access to the device.
File Download
T
o add, delete download tasks or change
download task properties.
Maintenance Maintenance Provides device maintenance including backup
the status of your configuration to the device,
firmware upgrade, system restart and reset
factory default.
Web Server Web Server To change the Web server prosperities.
USB Detail Shows the USB device information that currently
connected to the device.
Disk Setup
T
o setup the USB device properties that
connected to the device.
Printer Setup
T
o enable/ disable the printer server functionality
and change printer names.
Clean Printer
Job Queue
To remove all printer jobs that waiting for
printing.
34