User manual

ENMUV-2 – User’s Manual

3.3 Standby and Hibernate, Shut Down and Restart

After the ENMUV-2 was connected with a computer and an external monitor, the display of

external monitor will be blank when the computer goes into standby or hibernate mode.

When the computer returns to an active state, the display of external monitor keeps the

same settings as it before. If the add-on monitor is in extended mode and the computer

requires a login after standby or hibernate mode, the login dialogue window appears in the

primary monitor, not the external monitor.

If the computer is shut down, restarted and logged in, the add-on monitor returns to the

same mode as it shutdown before.

3.4 Disconnecting the ENMUV-2

When you unplug the ENMUV-2 from the computer, and the add-on monitor goes blank.

Then all the windows and icons will move back to primary monitor.

If you plug it again, the add-on monitor returns to the same mode as it unplug before. But

windows and icons that were previously on the add-on monitor will not be moved back.

3.5 Using Dual ENMUV-2

You can use 2 ENMUV-2 simultaneously:

1. Install the driver as described in the “Chapter 2: Installation and connect the first

ENMUV-2 to your computer.

2. Then plug the second a ENMUV-2 to your computer. The system will

automatically complete the installation.