User manual

ENMUV-2 – User’s Manual

3. Use Windows Key+P to display a menu

(and cycle through it) to choose

Duplicate.

• Manual Setting

In mirror mode, the ENMUV-2 will automatically select the settings (screen

resolution, color quality and refresh rate) for the add-on monitor. You can manually

adjust the settings as required. However, the settings of the add-on monitor are

limited by that of the primary monitor. For example, even though your add-on

monitor supports a resolution of up to 1920x1080, you can only configure it to use

1280x1024 due to the primary monitor only supports a resolution of up to

1280x1024.

If you change the video output to mode and then want to switch back to mirror mode,

follow these steps:

1. Position the mouse anywhere on your computer desktop, right-click and select

Windows 7: Choose Screen Resolution

Windows Vista: Personalize => Display Settings

Windows XP/2000: Properties => Settings

2. Choose the option with the string “DisplayLink Graphics Adapter” in the Display

drop-down menu.

3. Windows 7: Choose “Duplicate these displays” in Multiple Displays drop-down

Windows Vista: Uncheck the Extend the desktop onto this monitor box

Windows XP/2000: Uncheck the Extend my Windows desktop onto this monitor

box

4. Click OK to close the settings screen.