User`s guide

Security Setting

This page pops up after clicking the Security Settings button. Please follow the instructions

below:

Authentication Type Select to be open or WPA-PSK system.

Encryption Type

Select an encryption type from the drop list.

WPA Pre-shared Key A shared string between AP and STA. For WPA-PSK

authentication mode, this

field must be filled with

character longer than 8 and less than 32 length. (PCI

only)

Group Rekey Interval Only valid when using WPA-PSK encryption algorithm.

The key will change compliance with seconds or beacon

that user set. (PCI device only)

WEP Key Only valid when using WEP encryption algorithm. The

key must match the key on AP. There are several

formats to enter the keys.

a. Hexadecimal (40bits): 10 Hex characters.

b. Hexadecimal (128bits): 32Hex characters.

c. ASCII (40bits): 5 ASCII characters.

d. ASCII (128bits): 13 ASCII characters.