User`s guide

SOFTWARE INSTALLATION

This section will lead you to install the driver and utility of the Wireless LAN

Adapter.

Windows 98/ME/2000/XP/Vista Utility and Driver Installation

1. Insert the 54Mbps IEEE 802.11g Wireless LAN Adapter Driver & Utility CD-

ROM and the Auto-run program will appear. Alternatively, open a file browser

and double click on the autorun.exe file located in the CD directory. In some

specific setting on Windows system, you may need to proceed the software

manually, go to your Windows Start menu and choose Run, type

“D:\Utility\Vista\Setup.exe” or “D:\Utility\XP2K\Setup.exe”in the dialog box

and click OK.

Note: (D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows OS you are using)

2. If you need to install the driver manually, refer each Windows OS to the

following CD-Rom directory path: D:\Driver\<Windows OS>.

Note: (D:\ will depends on where the CD-ROM drive is located and

<Windows OS> will depend on the Windows OS you are using).

3. Click “Install Software (Utility)” to install the driver and software. Select “XP /

2K/ ME / 98” or “Vista” , depending on your operating system, and the install

wizard will begin installing the software. Follow the install wizard instructions

to complete the installation.