Product specifications

www.encore-usa.com

Destination: Defines the destination of the incoming packet that the rule is applied to.

 Interface: Select which interface (WAN or LAN) the rule is applied to.

 IP Range Start: Type the starting IP address that the rule is applied to.

 IP Range End: Type the ending IP address that the rule is applied to.

 Protocol: Select the protocol (TCP, UDP, or ICMP) of the rule.

 Port Range: Specify the port range.

Bottom Table

 Add: Click to add the rule profile to the table at the bottom of the screen.

 Update: Click to update a saved rule

 Delete: Select a saved rule and click “Delete” to remove the rule from the list.

 Clear: Click “Clear” to erase all saved rules

 Priority Up: Select a saved rule and click “Priority Up” to increase the priority of the

rule.

 Priority Down: Select a saved rule and click “Priority Down” to decrease the priority

of the rule.

 Update Priority: After increasing or decreasing the priority of a rule, click “Update

Priority” to save the changes.