Product specifications

9
3. Installing And Using NWay Switch
3.1 Installing The NWay Switch
The switch does not require software configuration. Users can immediately use
any of the features of this product simply by attaching the cables and turning the
power on.
3.1.1 Desktop Installation
To locate the switch on the desktop, place the switch on a clean, flat desk or
table close to a power outlet. Plug in all network connections and the power
cord, then the system is ready.
When deciding where to put the switch then you must ensure:
 It is accessible and cables can be connected easily
 Cabling is away from:
＊Sources of electrical noise such as radios, transmitters and broadband
amplifiers
＊Power lines and fluorescent lighting fixtures.
 Water or moisture can not enter the unit
 Air flow around the unit and through the vents in the side of the case is not
restricted (company recommend that you provide a minimum of 25mm
clearance)
To prolong the operational life of your units:
 Never stack units more than eight high if freestanding.
 Do not place objects on top of any unit or stack
 Do not obstruct any vents at the sides of the case