User`s manual

Serial Communication
SuperDrive 6.10 | 61
Figure below shows how to connect PC to the network of drives.
A - RS232 cable
RS232 CABLE
Connection between RS232/RS485 converter and PC must be realized by cable. Figure below shows this
cable in a simplified manner.
Flat cable with 6 connectors: only signal RXD, signal TXD and signal GND are updated.
Female DB9 connector: PC side.
Male DB25 connector: RS232/RS485 converter side.
JUMPERS IC109A
XW1 = A
W5 = A-B
W7 = Out
W8 = B-C
W9 = C
W15 = B-C
W16 = A
W17 = E
S1 = Out (Normal)
S2 = On (Term)