User`s manual

Table Of Contents

SuperDrive 6.10

SuperDrive 6.10 | 6

1 SuperDrive 6.10

Technical Support: Contact a local branch or representative.

Publication Date: 07/31/2012

Start

Click the Welcome button to start.

Welcome

1.1 Welcome

WELCOME TO SUPERDRIVE!

We thank you for using the SuperDrive, a windows graph tool for parameter setting, control and monitor of

Drives.

It permits to edit directly in the drive online parameters, or to edit offline parameter files stored in the

microcomputer.

It enables you to store parameters of all drives that exist in the installation.

The software also incorporates functions enable the upload to the drive of the microcomputer parameters

sets as well as the download from the drive to the microcomputer.

The communication between drive and microcomputer is realized via RS232 serial interface (point to point)

or by RS485 for network linkage.

1.2

Main Features

The Main features are:

· Online identification of connected drive,

· Offline configuration of drive,

· Parameter transfer from PC to the drive,

· Parameter transfer from drive to the PC,

· Offline editing of the parameters stored on the PC,

· Online editing of the parameters in drive,

· Monitoring of the drive status,

· Command operations (motor stop/run, jog, forward/reverse, local/remote, etc),

· Supports multiple databases for standard and special firmware version,

· RS232 point-to-point serial communication,

· RS485 network serial communication,

· Graphical monitoring of parameters,

· Online help.