User`s manual

Wizards
SuperDrive 6.10 | 54
5 Wizards
A Wizard is a tool which leads a user step-by-step to program drives.
Three wizards tools are available that are automatically activated by SuperDrive. These wizards tools are
activated during serial communication.
Initial Power-up Wizard
Control Setting Wizard
Self-Tuning Wizard
5.1 Initial Power-up Wizard
CFW-09
This wizard will guide the user through sequential steps. Parameters P201, P296, P400, P401, P403, P402,
P404, P406 will be programmed in this wizard.
MVW-01
This wizard will guide the user through sequential steps. Parameters P201, P400, P401, P403, P402 will be
programmed in this wizard.
5.2
Control Setting Wizard
VECTOR CONTROL
CFW-09
This wizard will guide the user through sequential steps. Parameters P400, P401, P403, P402, P404, P406,
P408, P409, P410, P411, P412, P413 will be programmed in this wizard.
MVW-01
This wizard will guide the user through sequential steps. Parameters P400, P401, P402, P403, P404, P405,
P406, P408, P409, P410, P411, P412, P413 will be programmed in this wizard.
VVW CONTROL
CFW-09
This wizard will guide the user through sequential steps. Parameters P400, P401, P403, P402, P404, P406,
P407, P399, P408, P409 will be programmed in this wizard.
5.3
Self-Tuning Wizard
CFW-09
This wizard will guide the user through sequential steps. Parameters P409, P410, P411, P412, P413 will be
estimated automatically by the drive.