User`s manual

Menus
SuperDrive 6.10 | 49
User can command the drive from an only command origin which Speed Reference Commands/ Run/Stop
Command and Direction of Rotation Command should be defined previously.
The user can visualize the function of each pin of the XC1/XC1A terminal according to the selections. Next
each selected item you can see the content of each parameter which will be sent to the drive when the
macro will be sent.
Selections
Speed Reference:
· HMI
Command Run/Stop:
· Terminals
· Direction of rotation
· Terminal
File Name - file name to save the macro.
Save - saves the macro in file.
Search - it allows selecting a macro file.
Print - it prints the macro.
Send - it sends the macro to the drive.
See orientative diagram - a new window is opened, where the diagram is orientative and corresponds to a
standard factory configuration. It does not correspond to the selected user configuration.
4.6 Tools
Drives Network
Update parameters to other fimrware version
Language
Options
4.6.1 Drives Network
ACCESS
Menu: Tools + Drives network
Shortcut Key: -
FUNCTION
Permits displaying all drives (1...30) that are connected to the SuperDrive or configured only.
DESCRIPTION
Following data can be displayed:
· Address