User`s manual

Table Of Contents

Menus

SuperDrive 6.10 | 48

4.5.5 Local/Remote Command with Selection via HMI

ACCESS

Menu: Macros + Local/Remote Command with Selection via HMI

Shortcut Key: -

FUNCTION

It allows defining the macro for the CFW-09 drive.

The macro parameters can be saved in file. The macro can also be printed.

DESCRIPTION

User can command the drive from an only command origin which Local and Remote commands should be

defined previously.

The user can visualize the function of each pin of the XC1/XC1A terminal according to the selections. Next

each selected item you can see the content of each parameter which will be sent to the drive when the

macro will be sent.

Selections

Local Command:

· HMI

Remote Command:

· Terminals

File Name - file name to save the macro.

Save - saves the macro in file.

Search - it allows selecting a file with the macro.

Print - it prints the macro.

Send - it sends the macro to the drive.

See orientative diagram - a new window is opened, where the diagram is orientative and corresponds to a

standard factory configuration. It does not correspond to the user selected configuration.