User`s manual

Menus
SuperDrive 6.10 | 47
P127 - Reference 4 Multispeed
or
· 8 speeds
P124 - Reference 1 Multispeed
P125 - Reference 2 Multispeed
P126 - Reference 3 Multispeed
P127 - Reference 4 Multispeed
P128 - Reference 5 Multispeed
P129 - Reference 6 Multispeed
P130 - Reference 7 Multispeed
P131 - Reference 8 Multispeed
File Name - file name to save the macro.
Save - saves the macro in file.
Search - it allows selecting a macro file.
Print - it prints the macro.
Send - it sends the macro to the drive.
Read the Project - it reads each parameter stored in the project and loads them in the suitable field.
Read the Drive - it reads each parameter from the drive and loads them in the suitable field. The read
parameters are not stored in the project. They are only displayed.
See orientative diagram - a new window is opened, where the diagram is orientative and corresponds to a
standard factory configuration. It does not correspond to the user selected configuration.