User`s manual

Menus
SuperDrive 6.10 | 44
· Potentiometer 5 kOhms 1 or 10 turns - AI1
· Potentiometer 5 kOhms 1 or 10 turns - AI2
· Electronic Potentiometer - DI3/DI4
· Electronic Potentiometer - DI5/DI6
· Multispeed
· Via HMI keypad
· Via serial
Options for Run/Stop Commands:
· Via digital input with ramp enable
· Via digital input with general enable - DI1
· Via digital input with general enable - DI3
· Via digital input with general enable - DI4
· Via digital input with general enable - DI5
· Via digital input with general enable - DI6
· Via digital input with ramp and general enable - Disable by Ramp DI1 - General Enable DI3
· Via digital input with ramp and general enable - Disable by Ramp DI1 - General Enable DI4
· Via digital input with ramp and general enable - Disable by Ramp DI1 - General Enable DI5
· Via digital input with ramp and general enable - Disable by Ramp DI1 - General Enable DI6
· Via HMI Keypad
· Via serial
Options for Direction of Rotation:
· Only one Direction of rotation - CW
· Only one Direction of rotation - CCW
· CW/CWW via digital input
· Via HMI Keypad - CW
· Via HMI Keypad - CCW
· Via serial - CW
· Via serial - CCW
File Name - file name to save the macro.
Save - saves the macro in file.
Search - it allows selecting a macro file.
Print - it prints the macro.
Send - it sends the macro to the drive.
Read the Project - it reads each parameter stored in the project and loads them in the suitable field.
Read the Drive - - it reads each parameter from the drive and loads them in the suitable field. The read
parameters are not stored in the project. They are only displayed.
See orientative diagram - a new window is opened, where the diagram is orientative and corresponds to a
standard factory configuration. It does not correspond to the user selected configuration.
4.5.3 Always Remote Command
ACCESS
Menu: Macros + Always Remote Command
Shortcut Key: -
FUNCTION
It allows defining the macro for the CFW-09 drive.
The macro parameters can be saved in file. The macro can also be printed.