User`s manual

Menus
SuperDrive 6.10 | 31
Length: 3 meters.
Maximum cable length: 10 meters.
Table below shows the cable pin location. You can use DB25 male connector or DB9 male connector.
Drive
Modem
Signal name
RJ11
DB25
DB9
TD (Transmit Data)
6
2
3
RD (Receive Data)
4
3
2
SG (Signal Ground)
5
7
5
Only the signal RD, TD and GND are used.
Connector Pinout
The following figures show the pinout of various connectors and aim to help on cable verification.
Using SuperDrive with Modem
1. Start SuperDrive.
2. Create project, by clicking [Project > New].
3. Identify connected Drive, clicking [Online > Identify Drives].