Motors | Automation | Energy | Transmission & Distribution | Coatings Software SuperDrive 6.
User's Manual Series: SuperDrive Language: English Document: 10001830633 Publication Date: 07/31/2012
Content Content 1 6 SuperDrive 6.10 1 Welcome ................................................................................................................................... 6 2 Main Features ................................................................................................................................... 6 3 What's New ................................................................................................................................... 7 4 Migrating from .....
Content Select Drive Address ......................................................................................................................................................... 26 Read Parameters (Drive ......................................................................................................................................................... -> PC) 26 Write Parameters (PC .....................................................................................................................
Content Index 66 SuperDrive 6.
SuperDrive 6.10 1 SuperDrive 6.10 Technical Support: Contact a local branch or representative. Contact Us: http://www.weg.net/ Publication Date: 07/31/2012 Start Click the Welcome button to start. Welcome 1.1 Welcome WELCOME TO SUPERDRIVE! We thank you for using the SuperDrive, a windows graph tool for parameter setting, control and monitor of Drives. It permits to edit directly in the drive online parameters, or to edit offline parameter files stored in the microcomputer.
SuperDrive 6.10 Note: some features are not available in all drives. 1.3 · · · · What's New Communication Communication Communication Communication 1.4 with with with with MVW-01 V1.8x, MVW-01 V1.9x, CTW-04 V1.4x, CFW-09 V4.4x. Migrating from previous versions Due to the several facilities that have been introduced in this SuperDrive Version, it is not compatible with the previous versions of the SuperDrive (< V4.00).
Installation Instructions 2 Installation Instructions Before Installing SuperDrive Minimum Requirements Supported Drives Installing SuperDrive Uninstalling SuperDrive 2.1 Before Installing SuperDrive Check the following items before installing SuperDrive: · If the microcomputer meets the Minimum Requirements. · If the SuperDrive version is compatible with your drive, see Supported Drives. 2.
Installation Instructions (x86) = 32-bit Edition. (x64) = 64-bit Edition. 2.3 Supported Drives The following table shows drives and firmware versions that each database supplied with SuperDrive supports. Drive CFW-09 CFW-08 CFW-07 CFW-05 SSW-05 SSW-04 1.2X 1.4X 1.6X 1.77 1.9X 2.1X 2.4X 2.6X 3.1X 3.3X 3.7X 4.0X 4.4X 1.XX 2.XX 3.0X 3.6X 3.8X 3.9X 4.1X 4.2X 5.0X 5.2X 2.XX 3.XX 1.XX 2.XX 3.XX 4.XX 5.XX 2.0X 2.1X 2.2X 2.3X 2.XX 3.XX SuperDrive 5.70 5.80 5.90 5.91 6.00 6.
Installation Instructions SSW-03 SCA-05 SCA-04 CTW-04 MVW-01 4.XX 5.XX 5.2X 5.3X 5.4X 2.XX 3.XX 4.XX 5.XX 5.1X 5.2X 5.3X 5.4X 2.1X 2.2X 2.4X 2.7X 1.XX 2.XX 3.XX 4.XX 4.0X 4.1X 4.2X 1.0X 1.1X 1.4X 1.4X 1.5X 1.6X 1.7X 1.8X 1.
Installation Instructions Older Versions The following table shows drives and firmware versions that each database supplied with SuperDrive supports. Dri ve CF W09 CF W08 CF W07 CF W05 SS W05 SS W04 2.00 SuperDrive 4.30 5.00 5.10 X X X X X X X X X X X X X X 4.00 X 4.10 X X 4.20 X X X X X X X X X X X X X X X X X X X X X X 3.XX X X X 1.XX 2.XX 3.XX 4.XX 5.XX 2.0X 2.1X 2.2X 2.3X 2.XX 3.XX 4.XX 5.XX 5.2X X X X X X X X X X X X X X X X 1.2X 1.4X 1.6X 1.77 1.9X 2.1X 2.4X 2.6X 3.1X 3.
Installation Instructions SS W03 SC A05 SC A04 CT W04 MV W01 5.3X 5.4X 2.XX 3.XX 4.XX 5.XX 5.1X 5.2X 5.3X 5.4X 2.1X 2.2X 2.4X 2.7X 1.XX 2.XX 3.XX 4.XX 4.0X 4.1X 4.2X 1.0X 1.1X 1.4X 1.4X 1.5X 1.6X 1.7X 1.8X 1.9X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X (1) (2) (1) SCA-05 2.
Installation Instructions · Specify an empty folder within which to install SuperDrive. Verify that the installation location is correct and that you have available disk space for the installation. · Select the program group to create program's shortcuts. · Click OK to complete the setup. 2.5 Uninstalling SuperDrive If necessary, you can uninstall SuperDrive using the following procedures. Uninstallation As indicated below, use the Add/Remove Programs utility to remove SuperDrive.
SuperDrive Structure 3 SuperDrive Structure SuperDrive Architecture Project Architecture 3.1 SuperDrive Architecture The SuperDrive is divided in directories and several files are part of the system. SUPERDRIVE PATH The SuperDrive is installed in one directory of the hard disk called as "...\SuperDrive 6.10". DIRECTORY "...\SuperDrive 6.10" SuperDrive.exe Main File of the SuperDrive Chart.dll Communicate.dll Copy.dll Data.dll Document.dll HMI.dll IPowerup.dll ProgressBar.dll SDComm.dll SelfTuning.
SuperDrive Structure Icon files. *.bmp Bitmap files. *.jpg Jpg files. *.cur Cursor files. DIRECTORY"...\SuperDrive 6.10\Help" *.chm SuperDrive Help Files. DIRECTORY "...\SuperDrive 6.10\Media" *.wav Sound files. 3.2 Project Architecture The project consists in a directory and a set of files. PROJECT ARCHITECTURE Each project is stored in the directory" "...\SuperDrive 6.10\Projects\XXXXXXXX" where XXXXXXXX is the name of the project. All files are stored in this directory.
SuperDrive Structure XX.sdp File with the drive data. XX.mot File with the motor data. *.cht File with the adquired points from drive. XX.hmi File with parameters stored in the EEPROM memory of the keypad. *.gol* File with the adquired points from drive. *.trc* File with the data stored by the Trace function, acquired from drive. *.err File with the register of errors stored in the drive. SuperDrive 6.
Menus 4 Menus Project New Open Close Save as Remove Print Setup Print Exit View ToolBar DriveBar StatusBar Offline Parameters Application Data Customer Data End User Data Drive Data Motor Data Online Select Drive Address Read Parameters (Drive -> PC) Write Parameters (PC -> Drive) Monitor Parameters Monitor Using Keypad Monitor Parameters using Modem Acquire Parameter View Chart Online Graph Trace Function Error Log Identify Drives Communication Settings Macros Basic Application Always Local Command Alwa
Menus Help Topics About SuperDrive 4.1 Project New Open Close Save as Remove Print Setup Print Exit 4.1.1 New ACCESS Menu: Project + New Shortcut Key: Ctrl+N FUNCTION It creates a new project. DESCRIPTION Enter the name of the new project. If the selected name is valid, the project will be open after confirmed by the Ok button. The cancel button does not created the project and closes the dialogue. 4.1.2 Open ACCESS Menu: Project + Open Shortcut Key: Ctrl+O FUNCTION SuperDrive 6.
Menus Opens an existing project. DESCRIPTION Select one of the existing projects from the project list and press Ok button or press with the left button of the mouse two times on the selected project. The project will be opened automatically and the drive network window shows the drives that are configured in the project. 4.1.3 Close ACCESS Menu: Project + Close Shortcut Key: - FUNCTION Closes the current project.
Menus Shortcut Key: - FUNCTION Removes the selected project. DESCRIPTION Select a project from the list of existing projects and press OK button. The user has to confirm project deletion before it is completely removed. OK button is disabled while no project is selected. Any project can be removed, including the active project (the one that is opened). 4.1.6 Print Setup ACCESS Menu: Project + Print Setup Shortcut Key: - FUNCTION It changes the printer and the printing options.
Menus · Motor Data · Parameters 4.1.8 Exit ACCESS Menu: Project + Exit Shortcut Key: - FUNCTION Closes the open project and quits the SuperDrive. DESCRIPTION All information and configuration are stored automatically. 4.2 View ToolBar DriveBar StatusBar 4.2.1 ToolBar ACCESS Menu: Display + toolbar Shortcut Key: - FUNCTION Shows and hides Toolbar. DESCRIPTION The Toolbar contains the icons corresponding to the menu items. SuperDrive 6.
Menus 4.2.2 DriveBar ACCESS Menu: Display + DriveBar Shortcut Key: - FUNCTION Shows or hides the drivebar. DESCRIPTION The drivebar contains the information about the selected drive: tag, address, type, firmware version, rated voltage, rated current and serial port. 4.2.3 StatusBar ACCESS Menu: display + Status bar Shortcut Key: - FUNCTION Displays or hides the status bar.
Menus 4.3.1 Parameters ACCESS Menu: Offline + Parameters Shortcut Key: - FUNCTION Permits offline editing of the parameter content. DESCRIPTION The online editing consists in displaying/changing of the parameter content. The parameters will be displayed sequentially on a grade in ascending order. There are 2 arrows for vertical scroll that permits to scroll the window up and down.
Menus DESCRIPTION Following data can be stored: title, version, data, description and comments. 4.3.3 Customer Data ACCESS Menu: Offline + Customer Data Shortcut Key: - FUNCTION Permits displaying/changing of customer data. DESCRIPTION Following data can be stored: company data (company address, city, state, Zip Code, country and home page) and data for contacts (name, function, department, telephone, mobile phone, fax, bip and e-mail). 4.3.
Menus Permits displaying/changing of the drive data. DESCRIPTION The following data can be stored: address, type, firmware version, rated voltage, rated current, tag, commercial reference and serial number. Update Button: SuperDrive requests some basic data about the drive, such as type, firmware version, rated voltage, rated current. If no drive is detected at the address, then the fields will be erased automatically and all files related to this address will be deleted. 4.3.
Menus Identify Drives Communication Settings 4.4.1 Select Drive Address ACCESS Menu: Online + Select Drive Address Shortcut Key: - FUNCTION Selects one of the drive configured in the project. DESCRIPTION The configured drive is indicated by the check mark at the left of the selected menu item. 4.4.2 Read Parameters (Drive -> PC) ACCESS Menu: Online + Read Parameters (Drive -> PC) Shortcut Key: - FUNCTION Transfers the content of each drive parameter to the microcomputer.
Menus DESCRIPTION Known as upload, the user can visualize the advance of the parameter writing. Errors that occurred during the writing will be displayed and the end o the writing process. The user shall select the destination address. Model, firmware version, and tag of the source drive are automatically presented.
Menus Enter and click on OK. Commands Show/Hide - This command shows or hides the secondary parameter lines on the grid. Ok - when this command is give, you exit the window. Help - this command opens a Help window. 4.4.5 Monitor Using Keypad ACCESS Menu: Online + Monitor Using Keypad Shortcut Key: - FUNCTION This function allows to show/change the drive parameter in a similar way as the drive keypad.
Menus · fault display. · display and change of the settable parameters. · Operation: enable, speed reference, current reference or position reference, STOP function, among others. 4.4.6 Monitor Parameters using Modem ACCESS Menu: Online + Monitor Parameters using Modem Shortcut Key: - FUNCTION Its allow you to monitor the parameters using a telephone line. DESCRIPTION It is possible to remotely monitor a drive by using the phone line.
Menus connected to pin 2 of the connector DB9 and so forth. Table below shows the pin location of this cable.
Menus Length: 3 meters. Maximum cable length: 10 meters. Table below shows the cable pin location. You can use DB25 male connector or DB9 male connector. Drive Signal name TD (Transmit Data) RD (Receive Data) SG (Signal Ground) RJ11 6 4 5 Modem DB25 DB9 2 3 3 2 7 5 Only the signal RD, TD and GND are used. Connector Pinout The following figures show the pinout of various connectors and aim to help on cable verification. Using SuperDrive with Modem 1. Start SuperDrive. 2.
Menus 4. Click [No] for the message "Drive connected?". 5. Follow the menu and manually select the address, drive model, and firmware version. It is not necessary to indicate the rated voltage and current. It is import to adjust on menu the same firmware version of the drive. If you do not find the correct option, please, contact WEG. SuperDrivewill not properly work if you choose a version that is different of the drive version. 6. Click on INSERT in order to add the drive. 7.
Menus &V shows the current configuration and the saved profile. To implement these commands correctly, check the modem manual or contact the ATMC Technical Support. Jumpers of the Modem MV34: S1 = 2-3 S2 = S3 = 2-3 Encore Electronics Inc. http://www.encore-usa.com/product.php?id=30 Model ENF656-EV-CIPR external modem. To display the commands, use the commands "ATE1". E1 = Eco enabled, ecoa commands to the computer to display what is entered via keypad.
Menus Shortcut Key: - FUNCTION It allows to acquire up to 4 parameters at the same time. DESCRIPTION File Name: file name where the acquired points will be saved. Example: P9 (full path will be showed on the window) Drive Address: drive address in the network (01...30). Parameters Number: number of parameters that will be monitored (01...04). Parameters: number of each parameter which will be acquired. Time between points: time between acquisitions. Milliseconds: range from 200...
Menus "P012 - DI6 = 0": when DI6is inactive, the acquisition is started. "P012 - DI6 = 1": when DI6 is active, the acquisition is started. "P012 - DI7 = 0": when DI7 is inactive, the acquisition is started. "P012 - DI7 = 1": when DI7 is active, the acquisition is started. "P012 - DI8 = 0": when DI8 is inactive, the acquisition is started. "P012 - DI8 = 1": when DI8 is active, the acquisition is started. "P012 - DI9 = 0": when DI9 is inactive, the acquisition is started.
Menus · Computer operational system is slow; too many programs running at the same time; number of parameters and samples being acquired. · The timer that controls the sampling rate restarts the count when the processing routine ends; therefore, all above delays are added to the acquisition time. 4.4.8 View Chart ACCESS Menu: Online + View Chart Shortcut Key: - FUNCTION It permits to view the chart with up to 4 parameter that were acquired (Acquire Parameter function).
Menus variables list. By choosing the variable, the description and the minimum and maximum scale values will be automatically loaded. Setting the time between samples The time between samples can be set on the time between samples textbox. This is the time interval between two consecutive signal samples. Setting the time scale Choose a horizontal scale for the graph from the list. This is the time interval presented on the graph.
Menus Export It is possible to export the acquisition file data to the Microsoft Excel format. Select the item Export under the Graph menu to export the data. Copy the graph Select the item Copy to clipboard under the Graph menu to copy the graph to the clipboard. If the option Use white background when printing or copying under the submenu Color is selected, then the graph will be copied with a white background instead of the colors that appear on the screen.
Menus Trigger Value The trigger value shall be configured with the internal representation of the processor so that the trace function works properly. Example: If P550 = 4, set P551 = 4095 to compare the value of P004 with the total DC Link voltage value (100%). The parameter P004 uses the numerical format Q4.12. Data acquisition · The trace function is deactivated by pressing the Inactive button. P.S.: When the Inactive button is pressed, the previous data stored on the drive is erased.
Menus textbox. P.S.: In this mode the zoom cannot be changed. Print Press the Print button under the Settings tab to print the current graph screen with the channels data, trigger date, number of points per channel, and the trigger position. 4.4.11 Error Log ACCESS Menu: Online + Error Log Shortcut Key: - FUNCTION This function allows visualizing the last 100 drive errors. Available only for the MVW-01 drive.
Menus window shows the drives their characteristics. Manual Selection The manual selection is used when no drive is connected to the SuperDrive and is used only to create and offline configuration. The user can insert 1 drive in RS232 and up to 30 drives in RS485. For each drive you must define at minimum the address, type and firmware version. The definition of the rated voltage, rated current and tag are optional.
Menus 4.5 Macros Basic Application Always Local Command Always Remote Command Multispeed with Commands via Digital Inputs Local/Remote Command with Selection via HMI Local Command with Reference via HMI and 3-Wire Start/Stop 4.5.1 Basic Application ACCESS Menu: Macros + Basic Application Shortcut Key: - FUNCTION It allows defining the macro for the CFW-09 drive. The macro parameters may be saved in file. The macro can also be printed.
Menus P403 - Motor Rated Frequency P404 - Motor Rated HP P405 - Encoder PPR P406 - Motor Ventilation Type Basic Application Parameters The user must define the basic application parameters, which are P100, P101, P133 e P134. P100 - Acceleration Time P101 - Deceleration Time P133 - Minimum Speed Reference P134 - Maximum Speed Reference File Name - file name to save the macro. Save - saves the macro in file. Search - it allows selecting a macro file. Print - it prints the macro.
Menus · · · · · · · Potentiometer 5 kOhms 1 or 10 turns - AI1 Potentiometer 5 kOhms 1 or 10 turns - AI2 Electronic Potentiometer - DI3/DI4 Electronic Potentiometer - DI5/DI6 Multispeed Via HMI keypad Via serial Options for Run/Stop Commands: · Via digital input with ramp enable · Via digital input with general enable - DI1 · Via digital input with general enable - DI3 · Via digital input with general enable - DI4 · Via digital input with general enable - DI5 · Via digital input with general enable - DI6 ·
Menus DESCRIPTION User can command the drive from an only command origin which commands for speed reference, run/stop and direction of rotation should be defined previously The user can visualize the function of each pin of the XC1/XC1A terminal according to the selections. Next each selected item you can see the content of each parameter which will be sent to the drive when the macro will be sent. When Multipeed will be selected in the Speed Reference , the user must fill-in the value of P124 ... P131.
Menus Read the Project - it reads each parameter stored in the project and loads them in the suitable field. Read the Drive - it reads each parameter from the drive and loads them in the suitable field. The read parameters are not stored in the project. They are only displayed. See orientative diagram - a new window is opened, where the diagram is orientative and corresponds to a standard factory configuration. It does not correspond to the user selected configuration. 4.5.
Menus P127 - Reference 4 Multispeed or · 8 speeds P124 - Reference 1 Multispeed P125 - Reference 2 Multispeed P126 - Reference 3 Multispeed P127 - Reference 4 Multispeed P128 - Reference 5 Multispeed P129 - Reference 6 Multispeed P130 - Reference 7 Multispeed P131 - Reference 8 Multispeed File Name - file name to save the macro. Save - saves the macro in file. Search - it allows selecting a macro file. Print - it prints the macro. Send - it sends the macro to the drive.
Menus 4.5.5 Local/Remote Command with Selection via HMI ACCESS Menu: Macros + Local/Remote Command with Selection via HMI Shortcut Key: - FUNCTION It allows defining the macro for the CFW-09 drive. The macro parameters can be saved in file. The macro can also be printed. DESCRIPTION User can command the drive from an only command origin which Local and Remote commands should be defined previously. The user can visualize the function of each pin of the XC1/XC1A terminal according to the selections.
Menus User can command the drive from an only command origin which Speed Reference Commands/ Run/Stop Command and Direction of Rotation Command should be defined previously. The user can visualize the function of each pin of the XC1/XC1A terminal according to the selections. Next each selected item you can see the content of each parameter which will be sent to the drive when the macro will be sent.
Menus · · · · · Type Firmware Version Nominal Voltage Nominal Current Tag 4.6.2 Update Parameters to Other Firmware Version ACCESS Menu: Tools + Update parameters to other firmware version Shortcut Key: - FUNCTION This tool was designed for updating CFW-09 parameters from the original firmware version, where the parameters were created, to a different firmware version.
Menus 4.6.3 Language ACCESS Menu: Tools + Language Shortcut Key: - FUNCTION Selects the message language. DESCRIPTION You can select between Portuguese, English or Spanish. After user confirmation, SuperDrive shows the messages in the selected language. 4.6.4 Options ACCESS Menu: Tools + Options Shortcut Key: - FUNCTION Displays the option windows, where the user can configure the SuperDrive.
Menus After user's confirmation all configurations returns to the default values. Also the windows position and size (those that can be changed) will be changed to the default values. Shows the Warning window during the initialization When activated, the windows Warning is always displayed during the SuperDrive initialization Test of the serial port during initialization When activated, the configured serial port is tested during the SuperDrive initialization.
Menus 4.7.2 About SuperDrive ACCESS Menu: Help + About SuperDrive Shortcut Key: - FUNCTION Displays the window with information about SuperDrive. DESCRIPTION This window displays the number of the version, copyrights and system information. SuperDrive 6.
Wizards 5 Wizards A Wizard is a tool which leads a user step-by-step to program drives. Three wizards tools are available that are automatically activated by SuperDrive. These wizards tools are activated during serial communication. Initial Power-up Wizard Control Setting Wizard Self-Tuning Wizard 5.1 Initial Power-up Wizard CFW-09 This wizard will guide the user through sequential steps. Parameters P201, P296, P400, P401, P403, P402, P404, P406 will be programmed in this wizard.
Serial Communication 6 Serial Communication Drive Parametrization Protocol RS232 RS485 Adam 4520 IC109A MIW-02 Serial Communication Errors USB Serial Converter 6.
Serial Communication 310 311 312 SSW-03 SSW-04 SSW-05 RS232/RS485 RS232/RS485 RS232/RS485 62 62 308 Serial Bit Rate Data Bits, Parity, stop bits Serial Communication Protocol Drive Address Drive Address Drive Address 1 = 9600 bits/s 7=7bits, even parity, 1 stop bit 0 = WEGBUS 1 1 1 Drive and SuperDrive must use the same settings. For CTW-04 the general blocking DI (XC1:27) must be with 24 V (General enabled) to allow the communication to occur.
Serial Communication (1) PC with SuperDrive software. (2) DB9 Male connector. (3) RS232 serial cable for PC/Drive connection. (4) Drive. (5) RJ11 connector. Drive CFW-05 CFW-07 CFW-08 CFW-09 SSW-03 SSW-04 SSW-05 SCA-04 SCA-05 CTW-04 MVW-01 Board CEC5/MEC5 CEC8 MCW-01(COS1) RS232 Serial Interface CCS1 CCS4 CCS50, CCS51 CCA-1 CCA-5 CCW4 MVC2 Connector XC7 XC3 XC8 XC7 XC2 X3 Serial Port RS232 X4 X4 XC3 XC7 Jumper XJ3=1-2 The DB9 connector should be connected to one on serial ports of the microcomputer.
Serial Communication The RS232 serial cable used for the connection between PC and drive is fitted at one end with a DB9 female connector. The PC connector is a DB9 male connector. If the PC connector is a DB25 male connector, you must use a DB9/DB25 adapter. Figure below shows the adapter. A - DB25 female connector B - DB9 male connector Table below shows the connection of the pins of the adapter. Signal name CD RXD TXD DTR GND DSR RTS CTS RI 6.
Serial Communication (1) PC with SuperDrive software. (2) DB9 male connector (COM1...COM16). (3) RS232 serial cable for PC / RS232/RS485 converter connection. (4) DB9 female connector. (5) RS232/RS485 converter. (6) RS232 serial cable for MIW-02/Drive connection. (7) CEF2 board (optional). (8) RS232 serial Interface optional board. (9) EBA optional board (XC4 connector) or EBB (XC5 connector). (10) Use a terminating resistor when it is the last drive. EBA board = terminating resistor S3, S3.1=ON and S3.
Serial Communication For the RS485/RS232 conversion, it is suggested the use of the MIW-02 module. For more details about these products, please contact the manufacturer. 6.5 Adam 4520 Function: RS232/RS485 converter. ADAM-4520 JUMPERS SW1 1 = On 2 = Off SW2 1 = Off 2 = Off 3 = Off 4 = Off 5 = On 6 = Off 7 = Off 8 = Off 9 = Off 10 = Off RS232 SERIAL CABLE FOR PC/ADAM-4520 CONNECTION A RS232 serial cable should be used for the connection of the RS232/RS485 converter to the PC.
Serial Communication Figure below shows how to connect PC to the network of drives. A - RS232 cable RS232 CABLE Connection between RS232/RS485 converter and PC must be realized by cable. Figure below shows this cable in a simplified manner. Flat cable with 6 connectors: only signal RXD, signal TXD and signal GND are updated. Female DB9 connector: PC side. Male DB25 connector: RS232/RS485 converter side.
Serial Communication S3 = On (Line Bias On) 6.7 MIW-02 INTERFACE MODULE FOR RS232/RS485 COMMUNICATION - MIW-02 Figure below shows MIW-02 connections. (1) LEDs (2) Terminating Resistor For further information see MIW-02 Interface Module Manual. RS232 SERIAL CABLE FOR MIW-02/DRIVE CONNECTION The user shall use a cable to connect the MIW-02 to the Drive. Figure below shows the cable parts for MIW-02 / Drive connection. 6.
Serial Communication 6.9 USB Serial Converter The USB SERIAL converter is the best solution for the connection of serial equipment (RS232) to USB ports, i. e., for connecting computer USB output to a RS232 serial equipment. This is a low cost solution and meets the install requirements of new computer serial ports that have busy bus bars or equipments (notebooks) that are not fitted with RS232 ports.
Solving Problems 7 Solving Problems Printing Problem Communication Problem 7.1 Printing Problem The screen and the printing resolution are not frequently the same. Thus when you are printing, the results may be not the same as seen on the screen. Thus, if general protection fault is shown when you are printing some topic, check the printer driver. If possible, change to a more updated version of the driver. Assure that the printer is activated and that you can print from any application.
Solving Problems COM1 Serial Port: Interrupt request 04 Input/Output Range 03F8-03FF COM2 Serial Port: Interrupt request 03 Input/Output range 02F8-02FF COM3 Serial Port: Interrupt request 04 Input/Output range 03E8-03EF COM4 Serial Port: Interrupt request 03 Input/Output range 02E8-02EF · Several computers may have serial communication problems when COM2 is used. When COM2 is used, check if this port is operating properly.
Index Initial Power-up Wizard 54 Installation Instructions 8 Installing SuperDrive 12 Index -L- -AAbout SuperDrive 53 Acquire Parameter 33 Adam 4520 60 Always Local Command 43 Always Remote Command 44 Application Data 23 -BBasic Application 42 Before Installing SuperDrive -CClose 19 Communication Problem 64 Communication Settings 41 Control Setting Wizard 54 Copyright Notice 7 Customer Data 24 -D- 8 Language 51 License 7 Local Command with Reference via HMI and 3-Wire Start/Stop 48 Local/Remote Com
Index -RRead Parameters Remove 19 RS232 56 RS485 58 26 -SSave As 19 Select Drive Address 26 Self-Tuning Wizard 54 Serial Communication 55 Serial Communication Errors Solving Problems 64 StatusBar 22 SuperDrive 6.
