User`s manual

ENDSS-4C8
56
Management Service
Activate Service: Enables or disables the management service for allowing
remote control from IE or PC Viewer.
Monitoring Service
Activate Service: Enables or disables the monitoring service for allowing remote
viewing from IE or PC Viewer.
Port: The default port number is “8000” for DVR video and audio transmission.
Video Transmission Quality: Selects the remote video transmission quality from
Lowest, Low, Standard, High, and Highest.
Audio Transmission: Enables [ ON] or disables [ OFF] audio transmission.
NOTE You must plan on the network structure if the MIS or Network
Administrator manages the network.
You should consult with the MIS or Network Administrator for the IP
address segment and port-forwarding rule for the DVR network setup.
3.9.3.4 Server Setup
Configure the DNS server.
SERVER SETUP
Default DNS Address [168. 95.192. 1]
Custom DNS Address [168. 95. 1. 1]
Dynamic DNS
Activate Service [ Disable]
Provider [www.dyndns.com]
Server Name [No Definition]
Account [No Definition]
Password [No Definition]
Default DNS Address
The Domain Name System (DNS) translates hostnames to IP addresses (default
setting). If there is no DNS address setting or fail, DVR will go for Default DNS Address.
Custom DNS Address
The Domain Name system (DNS) translate hostnames to IP addresses (customer
setting).