User`s manual

ENDSS-4C8
14
3.1 Turning on the DVR Box
The DVR is ready for operations after all peripherals such as cameras, mouse, etc
have been properly connected. Connect the power adaptors to turn the DVR on. The
DVR may take a few second to startup.
When a new hard drive is detected, it will ask whether or not you would like to format it.
Refer to the conditions stated below to determine which course of action to take.
Format the hard drive when:
» It is the initial installation of the hard drive (1
st
time to install the HDD in the DVR).
Do not format the hard drive when:
» The hard drive has already been formatted by the DVR and not formatted by other
devices.
The Home Screen is shown after the system is ready.
Release Date: May 25 2010 17:33:16
Video: PAL
Hard Drive: WDC WD7500AYPS-01ZKB Rec:02.0
715403MB…Empty Disk
DVR needs to format HDD,
All data will be lost…
Format / Cancel?