User`s manual

ENDSS-R4D8
11
2.4.1 Brief Description for Connecting Devices
Connecting the Security Cameras
Connect each security cameras to the DVR video inputs RJ-45 connector labeled CH1
to CH8 using CAT5 Ethernet cable. This connection provides the DVR with the
surveillance video input.
Connect the security monitoring device
Connect the security monitor to the video output labeled as “VIDEO-OUT” on the DVR.
The connection provides a video transmission path from the DVR to the security
monitor.
Connect the LAN Network Cable to connect to your home or office LAN
Connect the Ethernet network cable to the LAN port labeled as “ ” on the DVR. This
connects the DVR to your office or home network computers.
Connect the USB mouse
Connect the USB mouse to the mouse port labeled as “ ” on the DVR. This port
supports a USB mouse ONLY, no other USB devices will work in this port.
Connect the LCD Monitor
Connect the LCD monitor to the VGA output labeled as “VGA-OUT” on the DVR. The
DVR will transmit the video signal to the LCD monitor through this connection.
Connect the Sensors
Connect the sensor wires to the sensor slots labeled as “SENSOR” and numbered 1~4
with a common ground “G” on the DVR. This device often used with a security camera
at the monitoring space.
Connect the Alarm
Connect the alarm indicator to the alarm slots labeled as “ALARM 1+” and “ALARM 1-”
on the DVR. This supports alarm that can be triggered when an event has occurred.
Connect the PTZ Cameras
Connect the communication wiring for the PTZ camera to the RS-485 pins labeled as
“485+” and “485-” on the DVR. Note that PTZ-capable cameras still need to be
connected to a channel.
Connect the Audio Devices