Product specifications

26
www.encore-usa.com
Field
Description
WLAN
Interface
Enable or disable WLAN.
You need to enable WAN interface only if you want to use
WLAN and configure the parameters in this page.
Band
Select the working mode of the router. You can select 802.11b,
802.11g, or Mixed (802.11b/11g).
SSID
The service set identification (SSID) is a unique name to identify
the router in the wireless LAN. Wireless stations associating to
the router must have the same SSID. Enter a descriptive name
that is used when the wireless client connecting to the router. By
default, the SSID is ENDSL-4R5G.
Encryption
Configure the wireless encryption mode. You can choose None,
WEP, WPA (TKIP), WPA (AES), WPA2 (AES), WPA2 (TKIP),
or WPA2 Mixed.
 Wired equivalent privacy (WEP) encrypts data frames
before transmitting over the wireless network.
 Wi-Fi protected access (WPA) is a subset of the
IEEE802.11i security specification draft.
 WPA2 Mixed is the collection of WPA and WPA2 encryption
modes. The wireless client establishes the connection
between the router through WPA or WPA2.
Key differences between WPA and WEP are user authentication
and improved data encryption.
Set the encryption to WEP, the page as shown in the following figure appears.
The following describes the parameters of WEP encryption:
Field Description
Key Length Select the WEP key length. You can select 64-bit or 128-bit.
Key Format
 If the key length is set to 64-bit, you can select ASCII (5
characters) or Hex (10 characters).
 If the key length is set to 128-bit, you can select ASCII
(13 characters) or Hex (26 characters).
Key
The encryption key is used to encrypt the data. Both the
router and wireless stations must use the same encryption
key for data transmission.
 If you select 64-bit and ASCII (5 characters), enter any