Product specifications

24
www.encore-usa.com
The following table describes the parameters in this page:
Field
Description
Protocol
There are six protocols available. In this example, 1483 MER:
Static IP is the protocol for dial-up.
Connection
Type
There are two connection types available: VC-Mux and LLC.
In this example, LLC is the connection type.
VPI
Virtual path identifier (VPI) is the virtual path between two
points in an ATM network. Its valid value is in the range of 0 to
255. In this example, VPI is set to 0.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is in the range of
32 to 65535 (0 to 31 is reserved for local management of ATM
traffic). In this example, VCI is set to 100.
WAN IP Address
Enter the IP address for WAN connection, which is provided
by your ISP.
Subnet Mask
Enter the subnet mask of the WAN IP address, which is
provided by your ISP.
Default Gateway Enter the default gateway, which is provided by your ISP.
Primary DNS
Server
Enter the DNS server, which is provided by your ISP.
1483 Bridged
Select 1483 Bridged as the connection type, the page as shown in the following figure
appears.