Product specifications

21
www.encore-usa.com
Step 2 Select the corresponding ISP from the drop-down list.
After the selection, the protocol, connection type, VPI, VCI are displayed.
Step 3 Enter the correction information for dial-up.
There are six protocols available: PPPoE, PPPoA, 1483 MER: DHCP, 1483 MER: Static IP,
1483 Bridged, and 1483 Routed.
For example, please select Singapore and Infoserve Dial-up connection ADSL service
from the corresponding drop-down lists. The page as shown in the following figure appears.
PPPoE
In this example, select PPPoE as the protocol.
The following table describes the parameters in this page:
Field
Description
Protocol
There are six protocols available. In this example, PPPoE is the
protocol for dial-up.
Connection
Type
There are two connection types available: VC-Mux and LLC. In
this example, LLC is the connection type.
VPI
Virtual path identifier (VPI) is the virtual path between two points
in an ATM network. Its valid value is in the range of 0 to 255. In
this example, VPI is set to 0.
VCI
Virtual channel identifier (VCI) is the virtual channel between
two points in an ATM network. Its valid value is in the range of
32 to 65535 (0 to 31 is reserved for local management of ATM
traffic). In this example, VCI is set to 100.