Owner's manual

ENCORE
D-1
E.
D.
B.
B.
A.
C.
C.
F.
G.
LOCATED TO REAR
OF THE DECK
LOCATED UNDER THE ENGINE
TO THE REAR OF THE MACHINE
52-61" MID CUT
GEAR BOX
72" MID CUT
GEAR BOX
• SERVICE GEAR BOX EVERY 500 HOURS
• CHECK FOR LEAKS WEEKLY
• OIL: 80-90 GEAR LUBE
NOTES:
Consult Engine Manual for Engine
Manufactures Recommendations
on Operation and Maintenance
Information.
MAINTENANCE DAILY
FIRST
8 HR.
EVERY
25 HR.
EVERY
50 HR.
EVERY
100 HR.
EVERY
200 HR.
EVERY
300 HR.
CHECK AND AD ENGINE OIL

CHECK FOR LOOSE OR LOST NUTS AND SCREWS

CHECK FOR FUEL AND OIL LEAKAGE

CHECK OR CLEAN AIR INTAKE SCREEN

CLEAN AIR CLEANER FOAM ELEMENT 
 
CLEAN AIR CLEANER PAPER ELEMENT 
 
CLEAN DUST AND DIRT FROM CYLINDER AND
CYLINDER HEAD FINS 

TIGHTEN NUTS AND SCREWS

CHANGE ENGINE OIL
 
CLEAN AND REGAP SPARK PLUG

CHANGE OIL FILTER

REPLACE AIR CLEANER PAPER ELEMENT 

CLEAN COMBUSTION CHAMBER 

CHECK AND ADJUST VALVE CLEARANCE 

CLEAN AND LAP VALVE SEATING SURFACE 

 : SERVICE MORE FREQUENTLY UNDER DUSTLY CONDITIONS
 : HAVE AN AUTHORIZED ENGINE MFG DEALER PERFORM THESE SERVICES
GREASE FITTING LUBRICATION LIST
A.
FOOT LIFT PIVOTS
1 PUMP / 100 HOURS
E.
BACK RAIL
1 PUMP / 40 HOURS
B.
CASTER
SUPPORT BEARING
5 PUMPS / 250 HOURS
F.
DRIVE SHAFT
1 PUMP / 40 HOURS
C.
FR
ONT CASTER
2 PUMPS / 40 HOURS
G.
POWER SHAFT BEARINGS
1 PUMP / 250 HOURS
D.
PIV
OT JOINTS (LEFT & RIGHT
SIDE)
1 PUMP / 40 HOURS