User guide

ConÞguration 3-41
3
Table 3-15 Miscellaneous Management ConÞguration Parameters
Parameter Setting Description
Connection FDL, Modem,
Direct
DefaultÑDirect. In EFS mode, set to FDL (Facility
Data LinkÑa four Kbit/s data channel provided by
12 of the 24 ESF framing bits, used by the carrier to
request reports, clear error counters and activate loop
backs) to enable a connection with the remote SoloT1.
Set to Modem when using a modem connection.
Timeout When
Logged On
1 Min, 15 Min. 60
Min., Unlimited
DefaultÑUnlimited. Applies only when you are
logged on. This is the time span after which, if it does
not detect activity, the system warns that you will be
logged off in 30 seconds.
Timeout When
Not Logged On
1 Min, 15 Min. 60
Min., Unlimited
DefaultÑUnlimited. Applies only when a terminal is
connected through a modem and you are not logged
on.This is the time span after which the modem
disconnects the phone line if no activity is detected.
Phone Number 1 Default Ñ empty
text string
Applies only when youÕre connected through a
modem. Enter a unique, valid Hayes-modem dial
string. The modem dials out using the Þrst dial
string, then automatically tries the second dial string
if the Þrst does not respond.
Phone Number 2 Default Ñ empty
text string
Applies only when youÕre connected through a
modem. Enter a valid and unique Hayes-modem dial
string. The modem dials out using this second
number when the Þrst number does not respond. If
the second number also fails, the
DSU/CSU waits
Þve minutes then automatically tries the Þrst number
again and continues in this pattern.
Normal User
Password
Text string Enter the login password for the Normal User (20
char. max).
Superuser
Password
Text string Enter the login password for the Superuser (20 char.
maximum).